# Low Voltage Lighting

> Lighting systems that operate on 12V or 24V instead of mains voltage (120V/240V). Common in landscape lighting and LED strips — safer to install and requires a transformer.

**Source:** <https://ledlightinginfo.com/glossary/low-voltage-lighting>

Low voltage lighting runs on 12V or 24V DC instead of the 120V or 240V AC that comes out of your wall outlets. The lower voltage makes the system inherently safer to install — you can bury wire in the garden, run it through damp areas, and touch the connections without risk of lethal shock.

The most common low-voltage application is landscape lighting. A transformer (plugged into a standard outdoor outlet) steps mains voltage down to 12V and distributes it to path lights, spotlights, and accent fixtures through direct-burial cable. This is a project most homeowners can DIY without hiring an electrician.

LED strips are the other major low-voltage application — almost all strips run on 12V or 24V DC. The choice between 12V and 24V comes down to run length: 12V strips experience more voltage drop over distance, causing the far end to appear dimmer. 24V strips can run roughly twice as far before voltage drop becomes visible, making them the better choice for runs over 5 meters.

## Specifications
| Spec | Value |
| --- | --- |
| 12V | Landscape lights, MR16 bulbs, some strips |
| 24V | Longer LED strip runs, commercial strips |
| Requirements | Step-down transformer or LED driver |

## Related Terms

- [IP Rating](https://ledlightinginfo.com/glossary/ip-rating.md) — Ingress Protection rating — a two-digit code indicating resistance to dust (first digit, 0-6) and water (second digit, 0-9). Higher numbers mean better protection.
- [MR16 Bulb](https://ledlightinginfo.com/glossary/mr16-bulb.md) — A compact multifaceted reflector bulb 2 inches in diameter, commonly used in track lighting, display cases, and landscape fixtures. Usually runs on 12V.
- [GU5.3 Base](https://ledlightinginfo.com/glossary/gu5-3-base.md) — A bi-pin base with two pins spaced 5.3mm apart, used for low-voltage (12V) MR16 spotlight bulbs. Requires a transformer.
- [LED Driver](https://ledlightinginfo.com/glossary/led-driver.md) — A power supply that regulates current to LEDs, preventing flickering and enabling dimming. Every LED has one — either built into the bulb or as an external unit.